Package contents
- Ceramic coating Hendlex M3X (40 ml)
- Microfiber cloth (1 pc.)
- Coating applicator
- Application cloth
- Gloves (1 pair)
- Application manual
PREPARATION OF SURFACE
Adequately prepare the surface before application of Hendlex M3. Guidelines to follow to ensure the effectiveness of the product:
The surface must be washed thoroughly, free of any grease, contaminants, and residue.
Prior coatings or waxes should be removed. Hendlex Wax Remover is recommended.
Highly recommended to polish the car to remove any scratches, swirls, or holograms.
Ensure the surface is completely dry.
Note: it is recommended to use Hendlex Paint Prepare before applying coating for best results.
USAGE
1. Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.
*For smaller areas it is recommended to solely use the application cloth without using the applicator.
2. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.
3. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Make sure there are no uncovered spots left.
4. After applying coating, wait for:
– if temperature is lower than +24 °C – 3 minutes;
– if temperature is higher than +24 °C – 1 minute;
– do not coat if temperature is more than +30 °C.
5. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.
6. Recommended coating curing period:
– if the temperature is higher than +22°C – 12 hours initial;
– if the temperature is +20°C – 24 hours initial.
Do not wash the car for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.
Reviews
There are no reviews yet.