SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
COVERED AREA
DURABILITY
SHELF LIFE
THERMAL RESISTANCE
CHEMICAL RESISTANCE
WATER CONTACT ANGLE
APPLICATION TEMPERATURE
CURING PERIOD
STORAGE CONDITIONS
PACKAGING
PREPARATION OF SURFACE
Adequately prepare the surface before the application of Hendlex Sprayable Ceramic. Guidelines to follow to ensure the effectiveness of the product:
- The surface must be washed thoroughly, free of any grease, contaminants, and residue.
- If the car is waxed, wax should be removed before applying the coating. Hendlex Wax Remover is recommended.
- For best results, it is highly recommended to polish the car to remove any scratches, swirls, or holograms. Ensure the surface is completely dry. It is recommended to utilize Hendlex Paint Prepare before applying the coating.
USAGE
1. Facing away from the car, spray the coating on the microfiber cloth.
2. Spread the coating evenly until the surface is entirely covered by a wet uniform layer. It is recommended to work in small sections.
3. Allow the coating to cure for 30-60 seconds or until the even layer of coating starts turning into scattered droplets.
4. Polish the surface with the microfiber cloth until all excess coating is wiped off.
5. Wipe the coated area with a clean part of the microfiber cloth for the perfect finish.
6. Recommended coating curing period:
– if the temperature is above +20 °C – 12 hours initial;
– if the temperature is below +20 °C – 24 hours initial.
Do not wash the car for at least 7 days.
Note: After coating the car, turn the bottle upside down and clean the included sprayer by spraying the remaining coating out. Store with the original bottle cap.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
Reviews
There are no reviews yet.